1 x 2 Series Non Isolated, DC to DC Converters
MRS-WR High Voltage Series
Single, well-regulated, non isolated, high-voltage output units
"MRS-WR" High Voltage Series
MAXIMUM OUTPUT POWER: 1.2 – 15 WATTS
Packaging Size: 1 x 2 x (.55 to .70) inches
- single high voltage outputs
- wide input voltage range
- output highly regulated under all conditions of input voltage and output load ¸ no minimum loading required on output
- one continuous copper shield covers the entire electronics internally to provide a tight six-sided electrostatic shield
- low output noise on all outputs
Application information: The MRS-WR High Voltage DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high regulation is of prime importance, however tradeoffs in design have been made to yield low output ripple on output, regardless of load, while still operating at high efficiency.
Additional input and output voltages are available - - Please inquire
MRS-WRNI and MRD-WRNI Series
Single and Dual, non-isolated well-regulated output DC/DC Converters
"MRS-WRNI" Series
MAXIMUM OUTPUT POWER: 2.0 – 10.0 WATTS
Packaging Size: 1 x 2 x .5 -.7 inches
- single output, high efficiency dc/dc converters
- wide input voltage range
- output highly regulated under all conditions of input voltage and output load ¸ no minimum loading required on output
- one continuous copper shield covers the entire electronics internally to provide a tight six-sided electrostatic shield
- low output noise on all outputs
- operating frequency approximately 125 khz
“MRD-WRNI” Series
MAXIMUM OUTPUT POWER 4 WATTS Packaging Size: 1 x 2 x 5 inches
- dual outputs
- wide input voltage range
- all outputs highly regulated under conditions of input voltage and output load. ¸ balance loading is not required to maintain regulation on either output. internal six-sided electrostatic shield
- one continuous copper shield covers the entire electronics internally to provide a tight six-sided electrostatic shield
- low output noise on all outputs
- no overshoot during turn-on or load changes
- 125 khz switching frequency
Application information: The “MRD-WRNI” DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulations and low output ripple on each output individually, while still operating at high efficiency.
Additional input and output voltages are available - - Please inquire
SSM Series
Ultra wide input voltage range with single, non-isolated, well regulated output
“SSM” Series
MAXIMUM OUTPUT POWER 6.6 - 36.0 WATTS
Packaging Size: 1 x 2 x .5 inches
The SSM Series units have single, regulated and well-filtered outputs that are also short circuit protected. The unique circuiting employed in the SSM Series units provides a double-filtered, very low ripple and noise-regulated output while still maintaining a high efficiency. Units contain internal copper shielding and are fully encapsulated.
- high efficiency dc switching regulators
- fully encapsulated
- wide input voltage range
- internal six-sided electrostatic copper shield
- industry standard pin out
- low output noise and ripple
