Home    Who We Are    Order    Custom Design Request    Contact us 

2 x 2 Series Isolated, DC-DC Converters
 

“CR” Series
MAXIMUM OUTPUT POWER  3.6 - 4.5 WATTS
Packaging Size: 2 x 2 x .375 inches

The “CR” Series DC to DC Converters have dual outputs which are highly regulated and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI.

● ISOLATED DC/DC CONVERTERS
● HIGHLY REGULATED DUAL
   OUTPUT
● LOW NOISE
● SIX-SIDED ELECTROSTATIC
   SHIELD
● FULLY ENCAPSULATED

Applications: The “CR” Series units provide an ultimate in performance when powering very sensitive circuits such as A to D Converters.

Additional input and output voltages are available - - Please inquire

Send me Specifications

 

Nominal Input Voltage:
5, 12, 24, 28, 48 VDC

Nominal Output Voltage:
±12 or ±15 VDC

 

 

 

“HR” Series
MAXIMUM OUTPUT POWER  4.8 - 5.6 WATTS
Packaging Size: 2 x 2 x .4 inches

The “HR” Series DC to DC Converters have both single and dual outputs which are well regulated and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI.

● ISOLATED DC/DC CONVERTERS
● REGULATED OUTPUTS
● LOW NOISE
● OUTPUT TRACKS INPUT
● SIX-SIDED ELECTROSTATIC SHIELD
● FULLY ENCAPSULATED
 

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Single Output Units:
Nominal Input Voltage:
5, 12, 15, 24, 28, 48 VDC

Nominal Output Voltage:
5 to 24 VDC


Dual Output Units:
Nominal Input Voltage:
5, 12, 24, 28, 48 VDC

Nominal Output Voltage:
±5 to ±24 VDC

 

 

 

“FU” Series
MAXIMUM OUTPUT POWER  3.75 - 7.50 WATTS
Packaging Size: 2 x 2 x .4 inches

The “FU” Series DC-to-DC converters have single and dual isolated and well-filtered outputs, which are short circuit protected. Both input and output lines contain Pi filters.

● SINGLE AND DUAL ISOLATED DC/DC CONVERTERS
● HIGH EFFICIENCY
● OUTPUT TRACKS INPUT
● FULLY ENCAPSULATED

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Single Output Units:
Nominal Input Voltage:
5, 12, 24, 28, 48 VDC
Nominal Output Voltage:
5 to 48 VDC


Dual Output Units:
Nominal Input Voltage:
5, 12, 24, 28, 48 VDC
Nominal Output Voltage
±5 to ±24VDC
also available with output
+12 / -5 VDC

 

 

 

“GU” Series
MAXIMUM OUTPUT POWER  9.6 - 15 WATTS
Packaging Size: 2 x 2 x .875 inches

The “GU” Series DC to DC converters are contained have single and dual isolated and well-filtered outputs which are short circuit protected. Both input and output lines contain Pi filters.

● SINGLE AND DUAL ISOLATED DC/DC CONVERTERS
● HIGH EFFICIENCY
● OUTPUT TRACKS INPUT
● FULLY ENCAPSULATED

Additional input and output voltages are available - -
Please inquire

Send me Specifications

 

Single Output Units:
Nominal Input Voltage:
5, 12, 24, 28, 48 VDC
Nominal Output Voltage:
12 to 24 VDC

Dual Output Units:
Nominal Input Voltage:
5, 12, 24,28, 48 VDC
Nominal Output Voltage
±12 to ±24 VDC

 

 

 

“SERT” Series
MAXIMUM OUTPUT POWER  14.7  –  15 WATTS
Packaging Size: 2 x 2 x .6 inches

The “SERT” Series DC to DC Converters have triple outputs, which are well regulated, and short circuit protected. These units are well filtered and generate a minimum of noise and RFI.

● TRIPLE ISOLATED OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● ALL OUTPUTS HIGHLY REGULATED
   UNDER ALL CONDITIONS OF
   INPUT VOLTAGE AND OUTPUT
   LOAD.
● ONE CONTINUOUS COPPER SHIELD COVERS
   THE ENTIRE ELECTRONICS INTERNALLY TO
   PROVIDE A TIGHT SIX-SIDED ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS
● SLOW EXPONENTIAL RISE ON EACH OUTPUT
   WITH NO OVERSHOOT
● SLOW “SOFT” EXPONENTIAL RISE IN INPUT
   CURRENT DURING TURN ON
● NO DAMAGE IF OPERATED WITH NO LOAD
● NO EXTERNAL CAPACITORS REQUIRED
● OPERATING FREQUENCY … APPROXIMATELY 150 KHZ

Design Uses/ Applications: The “SERT” Converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance. Tradeoffs in design have been made to yield good regulations and very low output ripple on each output individually, regardless of load, while still operating at high efficiency.


Additional input and output voltages are available - -
Please inquire

Send me Specifications

 

 

Input Voltage Range:
9 –20 or 18 –36 VDC

Output Voltage:
+5, +12, -12 VDC or
+5, +15, -15 VDC

 

 

 

 


 


Select a category below to view detailed information.
 

 

Copyright ©2015
Caritronics
All rights reserved


Home| Who We Are | Order | Custom Design Request | Contact us


Caritronics, Inc. ●  tel  973.575.8916  ●  fax 973.882.3771