Home    Who We Are    Order    Custom Design Request    Contact us 

1 x 2 Series Non Isolated, DC-DC Converters


MRS-WR High Voltage Series
Single, well-regulated, non isolated, high-voltage output units

"MRS-WR" High Voltage Series
MAXIMUM OUTPUT POWER: 1.2 – 15 WATTS
Packaging Size: 1 x 2 x (.55 to .70) inches

● SINGLE HIGH VOLTAGE OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● OUTPUT HIGHLY REGULATED UNDER ALL CONDITIONS OF INPUT
    VOLTAGE AND OUTPUT LOAD
 ¸ NO MINIMUM LOADING REQUIRED ON OUTPUT
● ONE CONTINUOUS COPPER SHIELD COVERS THE ENTIRE
    ELECTRONICS INTERNALLY TO PROVIDE A TIGHT SIX-SIDED
    ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS

Application information: The MRS-WR High Voltage DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high regulation is of prime importance, however tradeoffs in design have been made to yield low output ripple on output, regardless of load, while still operating at high efficiency.

Additional input and output voltages are available - - Please inquire

Send me Specifications


 

Input Voltage Range:
10 - 14, 18 - 36
or 20 - 28 VDC


Output Voltage:
60 to 450 VDC

Output Voltage Setting Tolerance:
±4 - ±5%

 

 

 

MRS-WRNI and MRD-WRNI Series
Single and Dual, non-isolated well-regulated output DC/DC Converters
 

"MRS-WRNI" Series
MAXIMUM OUTPUT POWER: 2.0 – 10.0 WATTS
Packaging Size: 1 x 2 x .5 -.7 inches

● SINGLE OUTPUT, HIGH EFFICIENCY DC/DC CONVERTERS
● WIDE INPUT VOLTAGE RANGE
● OUTPUT HIGHLY REGULATED UNDER ALL CONDITIONS OF INPUT
    VOLTAGE AND OUTPUT LOAD
 ¸ NO MINIMUM LOADING REQUIRED ON OUTPUT
● ONE CONTINUOUS COPPER SHIELD COVERS THE ENTIRE
    ELECTRONICS INTERNALLY TO PROVIDE A TIGHT SIX-SIDED
    ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS
● OPERATING FREQUENCY APPROXIMATELY 125 KHZ

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Input Voltage Range:
4.0-7.2 or 4.5 to 7.2 VDC

Output Voltage:
+5V or +12 VDC

Output Voltage Setting Tolerance:
±1%

 

 

 

“MRD-WRNI” Series
MAXIMUM OUTPUT POWER  4 WATTS
Packaging Size: 1 x 2 x 5 inches

● DUAL OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● ALL OUTPUTS HIGHLY REGULATED UNDER CONDITIONS OF INPUT
    VOLTAGE AND OUTPUT LOAD.
 ¸ BALANCE LOADING IS NOT REQUIRED TO MAINTAIN REGULATION
       ON EITHER OUTPUT. INTERNAL SIX-SIDED ELECTROSTATIC
       SHIELD
● ONE CONTINUOUS COPPER SHIELD COVERS THE ENTIRE
    ELECTRONICS INTERNALLY TO PROVIDE A TIGHT SIX-SIDED
    ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS
● NO OVERSHOOT DURING TURN-ON OR LOAD CHANGES
● 125 KHZ SWITCHING FREQUENCY

Application information: The “MRD-WRNI” DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulations and low output ripple on each output individually, while still operating at high efficiency.

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Input Voltage Range:
4.6 –7.2, 4.6 – 8, 7 – 11 or 9 –18 VDC

Output Voltages:
-5 and +5 VDC

Output Voltage Setting Tolerance:
± 1% and ± 5%

 

 

 

SSM Series
Ultra wide input voltage range with single,
non-isolated, well regulated output
 

“SSM” Series
MAXIMUM OUTPUT POWER  6.6 - 36.0 WATTS
Packaging Size: 1 x 2 x .5 inches

The SSM Series units have single, regulated and well-filtered outputs that are also short circuit protected. The unique circuiting employed in the SSM Series units provides a double-filtered, very low ripple and noise-regulated output while still maintaining a high efficiency. Units contain internal copper shielding and are fully encapsulated.

● HIGH EFFICIENCY DC SWITCHING REGULATORS
● FULLY ENCAPSULATED
● WIDE INPUT VOLTAGE RANGE
● INTERNAL SIX-SIDED ELECTROSTATIC COPPER SHIELD
● INDUSTRY STANDARD PIN OUT
● LOW OUTPUT NOISE AND RIPPLE

Additional input and output voltages are available - -
Please inquire

Send me Specifications

 

Input Voltage Ranges:
1-35, 4.5 –6.0, 4.5 – 7.2, 4.5 –8, 4.9 – 35, 7 –35, 9 –30, 14 –35,
17 –35, 20 – 35 VDC

Output Voltage:
3.3 to 25 VDC

 

 

 

 

 

 


Select a category below to view detailed information.
 

 

Copyright ©2015
Caritronics
All rights reserved


Home| Who We Are | Order | Custom Design Request | Contact us


Caritronics, Inc. ●  tel  973.575.8916  ●  fax 973.882.3771