Home    Who We Are    Order    Custom Design Request    Contact us 

1 x 2 Series Isolated, DC-DC Converters
 

“ER” Series

The “ER” Series DC to DC Converters have a single isolated output, which is highly regulated, and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI.

“ER” Series
MAXIMUM OUTPUT POWER  1 – 1.5 WATTS
Packaging Size: 1 x 2 x .4 inches

● ISOLATED DC/DC CONVERTERS
● HIGHLY REGULATED SINGLE
   OUTPUTS
● LOW NOISE
● SIX-SIDED ELECTROSTATIC
   SHIELD
● FULLY ENCAPSULATED

Additional input and output voltages are available - - Please inquire

Send me Specifications

Nominal Input Voltage:
5, 12, 24, 28, 48 VDC

Nominal Output Voltage:
5 to 24 VDC

 

 

 

“MU” Series

The “MU” Series units have single or dual isolated and well-filtered outputs, which are short circuit protected. Both input and output lines contain Pi filters.

“MU” Series
MAXIMUM OUTPUT POWER  5 WATTS
Packaging Size: 1 x 2 x .375 inches

● ISOLATED DC/DC CONVERTERS
● HIGH EFFICIENCY
● ENCAPSULATED
● OUTPUT TRACKS INPUT
● INTERNAL SIX-SIDED
    ELECTROSTATIC SHIELD
● SINGLE AND DUAL OUTPUTS
   UNITS AVAILABLE
 

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Single Output Units
Nominal Input Voltage:
5, 12, 24, 48 VDC

Nominal Output Voltages:
5 to 24 VDC

Dual Output Units:
Nominal Input Voltages:
5, 12, 24, 48 VDC

Nominal Output Voltages:
±5 to ±24 VDC

 

 

 

“MR” Series

The “MR” Series units have single or dual outputs, which are highly regulated, and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI. They provide an ultimate in performance when powering very sensitive circuits such as A to D converters.

“MR” Series
MAXIMUM OUTPUT POWER  2 WATTS
Packaging Size: 1 x 2 x .37 inches

● ISOLATED DC/DC CONVERTERS
● HIGHLY REGULATED SINGLE
   OUTPUTS
● LOW NOISE
● INTERNAL SIX-SIDED
    ELECTROSTATIC SHIELD
● FULLY ENCAPSULATED

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Single Output Units
Nominal Input Voltage:
5, 12, 24, 48 VDC

Nominal Output Voltages:
5 to 15 VDC

Dual Output Units:
Nominal Input Voltages:
5, 12, 24, 48 VDC

Nominal Output Voltages:
±5 to ±15 VDC

 

 

 

“MRS-WR” and “MRD-WR” Series

The “MRS-WR” and “MRD-WR” series units have outputs, which are well regulated, and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI. All units are completely wrapped internally with one continuous copper sheet and then sealed with epoxy in an insulated enclosure.

“MRS-MR” Series
MAXIMUM OUTPUT POWER  9 WATTS
Packaging Size: 1 x 2 x .7 inches

● SINGLE ISOLATED OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● OUTPUT HIGHLY REGULATED
    UNDER ALL CONDITIONS
    OF INPUT VOLTAGE AND OUTPUT
    LOAD. (NO MINIMUM LOADING
    REQUIRED)
● ONE CONTINUOUS COPPER
   SHIELD COVERS THE ENTIRE
   ELECTRONICS INTERNALLY TO
   PROVIDE A TIGHT SIX-SIDED ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS

Special Applications: The MRS-WR DC to DC converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulations and low output ripple, regardless of load, while still operating at high efficiency.

Additional input and output voltages are available - -
Please inquire

Send me Specifications

 

Input Voltage Range:
18 – 36 VDC

Output Voltage options:
12 – 18 VDC

Output Voltage Setting Tolerance:
±1%

 

 

 

“MRD-WR” Series
MAXIMUM OUTPUT POWER  3  –  0.8 WATTS
Packaging Size: 1 x 2 x .60  –  .70 inches

● DUAL ISOLATED OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● ALL OUTPUTS HIGHLY REGULATED
   UNDER ALL CONDITIONS OF
   INPUT VOLTAGE AND OUTPUT
   LOAD.
 ¸ NO MINIMUM LOADING
    REQUIRED.
 ¸ BALANCED LOADING IS NOT REQUIRED TO
    MAINTAIN REGULATION ON EITHER OUTPUT
● LOW OUTPUT NOISE ON ALL OUTPUTS
● BALANCED LOADING IS NOT REQUIRED TO
   MAINTAIN REGULATION ON EITHER OUTPUT
● 125 KHZ SWITCHING FREQUENCY
● COPPER SHIELDED

Applications: The MRD-WR DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulation and low output ripple on each output individually, regardless of load on any output, while still operating at high efficiency.


Additional input and output voltages are available - -
Please inquire

Send me Specifications

 

 

Input Voltage Ranges:
4.5-8.0, 9-20, 18-36, 22-26, 36-72 VDC

Output Voltage Range:
±5 to±15 VDC
 
Output Voltage Setting Tolerance:
±2 to ±5%

Dual output voltages available as ± voltage with the same output current or 2 different currents.

 

 

 

“MRS-WRT” and “MRD-WRT” Series

The “MRS-WRT” and “MRD-WRT” Series units have outputs, which are well regulated, and short circuit protected. These units are very well filtered and generate a minimum of noise and RFI. All units are completely wrapped internally with one continuous copper sheet and then sealed with epoxy in an insulated enclosure

“MRS-WRT” Series
MAXIMUM OUTPUT POWER  4.2 – 14.4 WATTS
Packaging Size: 1 x 2 x (.5- .7) inches

● SINGLE ISOLATED OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● ALL OUTPUTS HIGHLY REGULATED
   UNDER ALL CONDITIONS OF
   INPUT VOLTAGE AND OUTPUT
   LOAD. (NO MINIMUM LOADING
   REQUIRED ON ANY OUTPUT.)
● ONE CONTINUOUS COPPER
   SHIELD COVERS THE ENTIRE
   ELECTRONICS INTERNALLY TO PROVIDE A TIGHT SIX-SIDED
   ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS
● NO OVERSHOOT DURING TURN-ON OR LOAD CHANGES
● 125 KHZ SWITCHING FREQUENCY

Applications: The MRS-WRT DC/DC Converts are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulation and low output ripple on each output, regardless of loading, while still operating at high efficiency.

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Input Voltage Range:
9-18, 18-36, 39-65 VDC

Output Voltage:
12-24 VDC

Output Voltage settings Tolerance:
±3%

 

 

 

“MRD-WRT” Series
MAXIMUM OUTPUT POWER  3  – 10 WATTS
Packaging Size: 1 x 2 x (.5- .7) inches

● DUAL ISOLATED OUTPUTS
● WIDE INPUT VOLTAGE RANGE
● ALL OUTPUTS HIGHLY REGULATED
   UNDER ALL CONDITIONS OF
   INPUT VOLTAGE AND OUTPUT
   LOAD. (NO MINIMUM LOADING
   REQUIRED ON ANY OUTPUT.)
  (BALANCE LOADING IS NOT
   REQUIRED TO MAINTAIN
   REGULATION ON EITHER OUTPUT.)
● ONE CONTINUOUS COPPER
   SHIELD COVERS THE ENTIRE
   ELECTRONICS INTERNALLY TO PROVIDE A TIGHT SIX-SIDED
   ELECTROSTATIC SHIELD
● LOW OUTPUT NOISE ON ALL OUTPUTS
● NO OVERSHOOT DURING TURN-ON OR LOAD CHANGES
● 125 KHZ SWITCHING FREQUENCY

Applications: The MRD-WRT DC/DC Converters are designed for use in wide range input voltage applications such as battery inputs where high efficiency is of prime importance, however tradeoffs in design have been made to yield excellent regulation and low output ripple on each output, regardless of load on any output, while still operating at high efficiency.

Additional input and output voltages are available - -
Please inquire

Send me Specifications

Input Voltage Ranges
18-36, 9-20, 22- 26 VDC

Output Voltages:
±5 to ±19 VDC

Output Voltage Setting Tolerance:
3 to 6%

 

 

 


Select a category below to view detailed information.
 

 

Copyright ©2015
Caritronics
All rights reserved


Home| Who We Are | Order | Custom Design Request | Contact us


Caritronics, Inc. ●  tel  973.575.8916  ●  fax 973.882.3771